Vertical Installation with Keyhole Mounts (0U Models)
Step 1 – Keyhole Mount installation
Attach the Keyhole Mounting Pegs to the PDU with the 2 supplied
Bracket Mounting Screws (M4 X 6).
Step 2 – PDU Mounting
Align the the Keyhole Mounts to the Keyhole Slots on the rack.
Insert and slide down to lock firmly into place.
Cord Retention Tray installation
(Optional for both horizontal and vertical installations)
Adjust the length of the Cord Retention Tray till the screw hole on the Tray
and PDU are aligned.
Attach the Cord Retention Tray to the PDU with the 4 supplied Cord
Retention Tray Mounting Screws (M3 X 6). Tighten the Cord Retention Tray
with the screw on it.
Use the Cable Ties provided to fasten each power cord to the Cord Retention
Tray.
Meter Configuration
!
Depending on installation method (vertical or horizontal),
the LED Meter may need to be rotated, before installation,
Note
for proper orientation.
Use a screwdriver to gently remove the LED Meter. Rotate the LED Meter
90 degrees, and insert back into the PDU.
5
For information on Cyberpower products, visit www.cyberpower.com