CyberPower PDU33 Series User Manual page 78

FTP Service
Allow users to enable/disable the FTP server service and configure the TCP/IP port of the FTP
server. The FTP server is used for upgrading Firmware. See
Service.
Item
Allow Access
Access Port
3-Phase Intelligent PDU User Guide
System Tab > Network Service > FTP Service
Enable FTP server access.
The TCP/IP port of the FTP server; 21 is the default value. Users can
change port setting to any unused port from 5000 to 65535 to enhance
security.
System Tab > Network Service > FTP
Definition
Web Interface
76