Table of Contents
Advertisement
Console Service
Select the Enable options to allow access using Telnet/SSH service and configure Telnet/SSH port
settings. See
System Tab > Network Service > Console Service.
Item
Access
Allow Access
Telnet Settings
Telnet Port
3-Phase Intelligent PDU User Guide
System Tab > Network Service > Console Service
Enable access using Telnet or SSH version 2, which transmits user
names, passwords, and data in an encrypted format.
The TCP/IP port that Telnet uses to communicate; 23 is the default
value.
Users can change the port setting to any unused port from 5000 to
65535 to enhance security.
Note: Telnet Client requires users to enter a space and the port number
after the PDU IP address on the command line to access the control
console.
Definition
Web Interface
74
Advertisement
Table of Contents
