Ridecontrol; Ridecontrol One - Giant MY20 Service Manual

2.4 RIDECONTROL

RIDECONTROL ONE

The RideControl One is a new RideControl unit in a minimalistic design. It has
all the important controls, large ergonomically placed buttons, and integrated
clear visual feedback using bright LED lights.
ANT+
In MY20, ANT+ connectivity is added to the RideControl One. Bike computers
and other devices that support the ANT+ LEV (Light Electric Vehicle) profile
can display various E-bike fields, like battery capacity, remaining range and
assist level. If the RC One has the ANT+ logo on it, these features are sup-
ported. Consult the device manufacturers information for supported data
fields and how to pair the e-bike.
BUTTONS
5 PHYSICAL BUTTONS OF RIDECONTROL ONE:
Short press to turn on the system
On/Off button
Long press (3 sec.) to turn system off.
Press to increase assist level. (In Walk Assist mode, press to activate
Assist UP button
walk assist.)
Assist DOWN button Press to decrease assist level.
Press to unlock Walk Assist mode for 3 seconds. Press "Assist Up" but-
Walk Assist button ton within 3 seconds to activate walk assist. (Walk Assist strength and
speed depend on current assist level and gear ratio.)
Long press to switch Lights On/Off (If lights are connected to the system)
Short press to toggle between options (On an external bluetooth acces-
Light/Mode button
sory)
Assist Up
On (short press)
Off (long press)
Light (long press)
Mode (short press)
Assist Down
Walk Assist
17