4.4 ENERGYPAK-BATTERY
ENERGYPAK FITTING IMPROVEMENT S.O.P.
MY19 FITTING INTEGRATED TOP RELEASE ENERGYPAK
PART 1: REPLACEMENT OF COVER RUBBERS
Open the lock and remove the battery from the bike. Place the battery on
1
a non-scratching surface.
Remove the small screw from the cover attachment plate on the bottom
2
of the Battery.
Slide the battery cover off the battery.
3
Pull off the existing bottom rubber from the cover. This rubber can be
4
discarded.
Peel the paper from the tape from the bottom rubber.
5
68