Integrated Speed Sensor Replacement - Giant MY20 Service Manual

4.1 SYNCDRIVE - MOTOR

INTEGRATED SPEED SENSOR REPLACEMENT

SOP FOR INTEGRATED SPEED SENSOR
ATTENTION
General operational procedures, to be taken into account before any
1
repairs are done.
• Remove the battery, to prevent accidental motor support engagement!
• Switch the system on, display will fade out.
• Reaching into an active system can cause serious injury!
• Pull connectors, do not pull wires.
Loosen the bolt in the frame which secures the EnergyPak, using the Torx
2
25 tool
Remove the EnergyPak by releasing the safety lock
3
Remove the back-wheel, the axle can be removed using a Allen key size 6
4
Measure air pressure and write it down.
5
Release the pressure out of the rear suspension.
48