Ridecontrol Evo - Giant MY20 Service Manual

RIDECONTROL EVO

The RideControl EVO remains a core item in MY20 and keeps evolving with
new firmware updates, adding improvements and functionalities.
OPERATION
The remote is used for all control of the RideControl EVO functions. For in-
formation on how to operate the EVO display, please refer to the e-bike user
manual. There it is described how to, for example, reset Trip Distance, or how
to change from Km/h to Mph.
COMPATIBILITY.
In principle, all MY20 EVO displays can be connected to any MY20 G-System
bike, and even older G-System bikes. Providing it runs the latest firmware,
the information on the screen can adapt to almost any G-System e-bike it is
connected to. For example, it will show 3 or 5 assist modes depending on
the motor type and version, and it will show different assist levels for Pro and
other motors.
There are some limitations. Some older EVO displays might not work well on
newer bikes because their hardware does not support the latest firmware.
Since both hardware and firmware are subject to change during the MY,
please always contact the Giant Service Department for the latest information.
Also make sure the latest Service Tool is installed, and the EVO display has
received the latest firmware update.
22