Ridecontrol Evo Error - Giant MY20 Service Manual

5.2 RIDECONTROL EVO ERROR

RideControl EVO error notifications
A wrench tool appears on the EVO screen. What is going on?
In case a problem is detected in the system., the EVO display will show;
• system message: for 2 seconds.
One of these root causes:
• SyncDrive error
• Speed sensor error
EnergyPak error
•
• Bluetooth error
RideControl error
•
Followed by the message:
• Your E-bike needs servicing
The EVO display will then return to the normal screen, but with the wrench
tool icon displayed as well. For most errors, the motor assist will remain func-
tional. Motor assist will only stop in case of a 'SyncDrive error'. The wrench
tool will show on the screen for as long as the problem persists.
Hardly ever there is reason for immediate concern. Simply restarting the
system will remove the error notification. If the error returns after the restart,
use the Service Tool to diagnose the problem. The Service Tool will identify
the exact error code(s). The error codes are described in the Service Tool
manual, and also a few pages further down in this G-System Service Manual.
Unless stated otherwise by Service Tool or Giant information, no part replace-
ment is needed.,
83