Ridecontrol - Remote & Display; Remote Button & Bracket - Giant MY20 Service Manual

4.2 RIDECONTROL – REMOTE & DISPLAY
REMOTE BUTTON & BRACKET
DISASSEMBLE
ASSEMBLE
Disconnect the display wire connector from the remote wire connector.
1
Loosen the grip/remote mounting bracket clamping screw.
Remove the handlebar endcap. Remove the grip and bracket from the
2
handlebar. Remove the grip from the remote mounting bracket.
Remove the 3 screws from the bottom of the remote.
3
Remove the remote from the mounting bracket.
4
Reverse the previous steps for re-assembly.
1
52