Ridecontrol - Remote & Display; Evo Display & Bracket (Mtb Type) - Giant MY20 Service Manual

4.3 RIDECONTROL - REMOTE & DISPLAY
EVO DISPLAY & BRACKET (MTB TYPE)
DISASSEMBLE:
Remove the screw from the cable exit hole cover. Then take the rubber out
1
of the hole and slide it out of the way.
Locate the display cable at the cable exit hole in the frame, and take out
2
the connectors. Please note that other cables can obstruct the exit hole.
Try to avoid using too much force while pulling out the connector to pre-
vent damage to the cable. When the connector is pulled completely out of
the frame, disconnect the displaywire connector from the mainwire con-
nector.
Disconnect the second displaywire connector from the remotewire con-
3
nector.
Remove the 4 bolts from the 2 display mounting bracket clamps.
4
Remove the display mounting bracket clamps.
5
53