Configuration - Avaya 4600 Series Installation Manual

Configuration

A sample configuration set-up is available following the instructions below.
1. To create the configuration files for each phone, you must first download the following software
from the SpectraLink website http://spectralink.com/service/software.html:
2. For the Avaya Voice Priority Processor (AVPP) software, look under NetLink SVP Server Avaya
AVPP Server and do the following:
a. Download the .EXE.
b. Extract the necessary files by unzipping the ZIP file.
c. Place the following files into the "Manager" directory: FLASHFS, SVP100.TOC and
ZVMLINUX.
3. For the Avaya Wireless Telephone software, look under NetLink Wireless Telephone – IP
Avaya 3606 and do the following:
a. Download the .EXE.
b. Extract the necessary files by unzipping the ZIP file.
c. Place the following files into the "Manager" directory: pd06ccc.bin and slnk_cfg.cfg.
4. Refer to the manufacturer's documentation to configure the access point with the following
information:
a. AVPP IP Address.
b. Individual telephone name.
c. Frequency Channel.
d. Security Key information.
5. Using a network cable, connect the AVPP to the IP Office control unit.
6. Refer to the Avaya Voice Priority Processor Installation Manual to configure the AVPP.
7. Create a configuration file for each AVPP terminal.
• From Program Files/.../Manager, copy and rename the configuration file for each AVPP
terminal based on the last 6 digits of the MAC address. Example – copy the slnk_cfg.cfg
file and rename it sl123456.cfg, assuming the terminal's MAC address is xxxxxx123456.
8. Configure the 3616/3626 telephones: Refer to the Avaya 3616/3626 Wireless IP Telephone
Installation and Configuration Guide.
IP Phone Installation
IP Office 3.1
Appendix G: 3616/3626 Installation
Issue 11c (14th September 2005)
Page 61