Easytouch Pl4/Psl4 Control System Wireless Controller Changing Battery/Features - Pentair EasyTouch PL4 User Manual

EasyTouch PL4/PLS4 Control System Wireless Controller Power Saving
®
Options and Changing Batteries
Power Save Options
Use the power save function to reduce power consumption and extend battery life. The power save options are:
Idle Time: If there is no control panel activity, the idle time can be set to 60 seconds (default), 30
•
seconds, or five minutes before it shuts down. The default time is 60 seconds. For information about
accessing the idle time options menu, see page 54.
Note: If the unit is not used for 60 seconds the power save function switches off the unit. To switch the unit on,
press the POWER ON button (see page 10).
Backlight Options
Use the backlight on time power save options to reduce power consumption and extend battery life. To access
the Backlight options menu, see page 48. The backlight options are:
On Time: Backlight is on for 60 seconds, 30 seconds, five minutes, or off. The default setting is 30
•
seconds.
• Brightness: Backlight brightness can be set to low, medium or high. The default setting is medium.
Battery Overview
Battery Replacement
The average life for the EasyTouch
with normal use. Battery life varies depending on the type of batteries used and the amount of usage. The
following battery types are compatible with the wireless controller:
• AA-size alkaline battery (four provided in the kit)
• AA-size Ni-MH rechargeable battery (four purchased separately)
Safety Precautions when using batteries
Read the following important information before installing batteries into the wireless controller.
• Never use batteries with split or peeling outer casings
• Never use combinations of different types of batteries or new and used batteries together
• Do not use manganese or Ni-Cd batteries
• Ensure that batteries poles are clean. Dirty poles can shorten battery life
• The time for which AA-size alkaline batteries can be used vary depending on the brand. Some brands
may provide less power than others. Note that the time Alkaline batteries can be used decreases in cold
conditions (0° C to 10° C (32° F to 50° F)). Therefore, it is recommended to use AA-size
Ni-MH batteries in the unit.
• When first purchased, or if left unused for a long period, the amount of time that the AA-size alkaline,
Ni-MH, or rechargeable batteries can be used, may be shortened.
Checking the battery charge
A check battery status icon displays on the main screen of the wireless controller. The check battery icon is
located in the lower right corner of the main screen.
Check battery icons
AUTO HEATER
SPA 85°F / 100°F
AIR 70°F
MON 09:30 AM
Control System Wireless Controller batteries can last the summer season
®
Ample battery charge.
Sufficient charge left in the batteries to operate the unit. The
unit's estimated battery life varies greatly depending on use and
backlight display time (see page 12).
Batteries are depleted. Before the batteries are completely depleted
this icon will start flashing, indicating that the LCD will shortly
go blank and the ireless controller will stop working. Replace
w
or recharge the batteries. Depending on the type of batteries
installed, this icon may display more quickly.
EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
11