Settings Menu: F° / C° (Fahrenheit/Celsius); Settings Menu: Is4 Spa-Side Remote Controller - Pentair EasyTouch PL4 User Manual

Settings Menu: F° / C° (Fahrenheit/Celsius)
The temperature settings for the water, solar and air can be displayed in either Fahrenheit or Celsius.
F° / C°
To change the temperature units:
MENUsSETTINGsF°/C°wDF°/C°
° °
F / C

FAHRENHEIT


Settings Menu: iS4 Spa-Side Remote Controller

You can specify any iS4 Spa-Side remote button to control different functions by assigning each button to
a specific circuit. For example, you can use the iS4 Spa-Side remote to activate the spa circulation and for
operating auxiliary equipment such as heater, lights, jet pump, air blower, waterfall, etc.).
Assign iS4
Before configuring the iS4 Spa-Side remote controller assign names to the circuits (see page 45).
To assign iS4 Spa-Side buttons:
MENUsSETTINGsIS4wASSIGN IS4
Assign iS4
Circuit: 1/4
[AUX 1 ]
Note: To disable
or enable the iS4
Spa-Side remote,
see Settings
Menu: Spa Side,"
on page 56.
Up/Down buttons: Select either Fahrenheit or Celsius. Press the Menu button to
save the settings and to return to the Settings menu options. Press the Menu button
again to return to the main menu options or press again to return to the main screen.
Up/Down buttons: Select a circuit to one of the iS4 buttons. You can set up to four

circuits (1/4, 2/4, 3/4, 4/4).
Right button: Move to the circuit setting.
Up/Down buttons: To configure the first button on the iS4 Spa-Side Remote, scroll

through the circuit names and find the circuit that you would like to assign to the first
button on the iS4. The generic circuits are: NONE, SPA, POOL, AUX 1-3, FEATURE
1-2. Selecting "NONE" does not assign a
Right button: Assign the next circuit (2/4).
Up/Down buttons: Select the first digit for the circuit number (1/4, 2/4, 3/4, 4/4) and
repeat the procedure for the other three buttons.
Press the Menu button to save the settings and to return to the Settings menu
options. Press the button again to return to the main menu options or press again to
return to the main screen.
circuit.
EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
49