Setting Up Lights; Assign The Circuit Name And Function - Pentair EasyTouch PL4 User Manual

24

Setting up Lights

The following section describes how to assign a light circuit name and function to control IntelliBrite
and/or FIBERworks
®
Assign the Light Circuit Name and Function
The first step in setting up a light circuit is to assign a name to the relay circuit (example; AUX 3, as "Pool
Light"), then assign the name "Pool Light" circuit in the Circuit Func. menu as a "light" circuit (IntelliBrite,
SAM, SAL..). The light circuit functions are: Light, SAM, SAL, Photon Generator, Color Wheel, Spillway,
MagicStream and IntelliBrite (see page 45). After assigning the circuit name and function, the light circuit
name "Pool Light" can be setup in the CONFIG menu for light position, color etc.
To assign a CIRCUIT NAME:
MENUsSETTINGSsCIRCUIT NAMESw
IntelliFlo
IntelliChlor
Circuit Names
Circuit Func.
Circuit Names
Circuit #: 1/7
Circuit : AUX 1
[POOL LIGHT ]
To assign a CIRCUIT FUNCTION:
MENUsSETTINGSsCIRCUIT FUNC.w
Circuit / Func. :

[POOL LIGHT ]
[INTELLIBRITE ]
Freeze: No

EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
lights.
Up/Down buttons: Select the circuit number 1/7. Press the Up button two times to

select AUX 1 to choose this circuit for a light circuit On/Off button. The generic circuits
names are: Spa, Pool, Aux 1-3, FEATURE 1-2 (Ft. 1-2). The circuit number (1/7)
corresponds to its assigned circuit name.

Right button: Select the system preset circuit names and user defined custom circuit

names.
Up/Down buttons: Scroll through the list of preset names (see page 45 for a
 complete list of circuit names). Select a name that describes where the light is
located or that suits the function, such as "Pool Light." AUX 1 has now been assigned
the circuit name "Pool Light." If you cannot find a name to match your circuit, you
can create your own custom name (see page 43). Repeat this step for all the circuit
buttons that you wish to assign names to.
Press the Menu button to return to the Settings menu. Press the Down button to and
select "Circuit Func." Press the Right button to access the Circuit Func. menu.
Up/Down buttons: Select the already assigned circuit name "Pool Light."
Right button: View "Circuit Functions" to assign to light circuit "Pool Light."
Up/Down buttons: Select the type of light circuit function to use. The circuit function
names are: LIGHT, SAM LIGHT, SAL LIGHT, PHOTON GEN, COLOR
Note: To use the "Color Swim" or "Color Set" feature, select IntelliBrite, SAM, SAL,
Photon Generator or Color Wheel. Select "MagicStream" for MagicStream laminars.
Press the Menu button three times to return to the main screen. WHEEL, VALVE,
SPILLWAY, FLOOR CLEANER, INITELLIBRITE, MAGICSTREAM, GENERIC, and
MSTR CLEANER. For a complete list of preset circuit functions, see "Preset Circuit
Functions" on page 45.
Press the Menu button to return to the Settings menu. Press the Down
button to and select "Circuit Func." Press the Right button to access the
Circuit Func. menu.
Up/Down buttons: Select the already assigned circuit name "Pool Light."
Right button: View "Circuit Functions" to assign to light circuit "Pool Light."
Up/Down buttons: Select the type of light circuit function to use. The circuit
function names are: LIGHT, SAM LIGHT, SAL LIGHT, PHOTON GEN,
COLOR WHEEL, VALVE, SPILLWAY, FLOOR CLEANER, INITELLIBRITE,
MAGICSTREAM, GENERIC, and MSTR CLEANER. For a complete list of
preset circuit functions, see "Preset Circuit Functions" on page 45.
Note: To use the "Color Swim" or "Color Set" feature, select IntelliBrite,
SAM, SAL, Photon Generator or Color Wheel. Select "MagicStream" for
MagicStream laminars.
Press the Menu button three times to return to the main screen.
, SAm , SAL
® ® ® ,