Diagnostics Menu: Software Rev; Diagnostics Menu: Bootloader Rev; Diagnostics Menu: Self Test - Pentair EasyTouch PL4 User Manual

Diagnostics Menu: Bootloader Rev

Displays the current bootloader revision for the indoor control panel and the main EasyTouch PL4/PSL4
Control System control panel.
MENUsDIAGNOSTICSsBOOTLOADER REV
Bootloader Rev
UIC: 1.02
UOC: 1.02

Diagnostics Menu: Self Test

Tests the control panel LCD and buttons. Follow the on-screen prompts to perform the tests.
MENUsDIAGNOSTICSsSELF TEST
Note: If the Indoor Control Panel is connected to the EasyTouch PL4/PSL4 Control System outdoor control
panel, select "LINK CLOSED" in the UART test to abort the UART test. This allows the test to complete with
and display PASSED.
Firmware Version
Soft: 2.130
Boot: 2.130
Press Any Button
Press Any Button
Backlight On
<=Backlight On
>=Backlight Off
Contrast:
Press any button
LED Test
Switch Test
Press any button
UART Test
<=Link Closed
>=Link Open
UIC: Displays the current bootloader revision level for the indoor control panel.
UOC: Displays the current bootloader revision level for the outdoor control panel.
Press the Menu button to return to the Settings menu options. Press the button again
to return to the main menu options or press again to return to the main screen.
Press the Right button to display the current software and boot loader revision levels
for the outdoor control panel.
Press the Right button to start the test:
Press the Right button to start the test:
Display Test: Press any button to start the LCD test.
Backlight Test: Press the Left then Right button.
Contrast Test: Press any button to continue.
LED Test: Press any button to continue. All of the button LEDs will be tested.
Switch Test: Press any button to continue. As prompted, press the appropriate
buttons.
UART Test: Select "LINK CLOSED" to abort this test if the optional Indoor Control
Panel is connected to the system Power Center.
Status: Passed - Code 0: After you have completed the test an error code
is displayed. "Passed" is displayed if the test was successful. For error code
descriptions, see "Self Test Error Codes," on page 59.
Press the Menu button to return to the Settings menu options. Press the button again
to return to the main menu options or press again to return to the main screen.
EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
55