Pentair EasyTouch PL4 User Manual page 25

Quick Start - Spa and Pool Operations (Shared Equipment)
MENUsSCHEDULESwSPA (POOL)
To create a schedule for your spa or pool:
Right button: Select the Spa or Pool circuit. You can also select any of the available
 SPA 0

circuits. The generic circuit names are: Spa, Pool, Aux 1-3, Feature 1-2.
POOL 0
Right button: Select Mode if there are existing programs. Skip this step to create a new
AUX 1 0
program.
AUX 2 0

Up/Down button: Select New to create a new program.
SPA 0/0 
Right button: To create a new program and enter the "Mode" settings.
Mode: None (New)
Up/Down button: 1/1 indicates that this circuit has one program. If there are existing
programs assigned to this circuit, use these buttons to view and select the existing
program settings.
Right button: To select the "Schedule" settings.
SPA 1/1

Right button: Move to start and stop time settings.
Mode: Schedule
08:00A - 05:00P
Up/Down and Right buttons: Set start and stop hour (A/P), minutes.
_ _ _
s t tfs
m w

The A (AM) and P (PM) time is set when setting the start and stop hour.
Right button: Move to days of the week to run the program.
Right and Up/Down buttons: By default the program is set to run all the days of the
week. If you wish to edit which days to run the program, select the day of the week, then
press the Up/Down button to remove the bar from the top of the letter. A bar on top of the
letter indicates the day selected to run the program.
Press the Menu button to save the settings and to return to the Schedules menu options.
Press the button again to return to the main menu options or press again to return to the
main screen.
EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
Continued
17