Controlling Lights; Switch On Lights Manually And Synchronize Light Colors; Schedule Start And Stop Times For Equipment - Pentair EasyTouch PL4 User Manual

16
Quick Start - Spa and Pool Operations (Shared Equipment)

Controlling Lights

MENUwSCHEDULESwSPA (POOL)
From the Lights screen you can manually switch all lights on or off, configure and synchronize colored lights.
For more information about setting up IntelliBrite colored show modes, fixed colored lights, SAm and SAL
Color Swim and Color Set modes, refer to the Lights Menu on page 23.
Modes
Colors
All On
All Off

Switch on lights manually and synchronize light colors

From the Lights screen you can manually switch all lights on or off, and synchronize colored lights. Up to
three (3) lights can be controlled. For more information about setting up lights, including IntelliBrite
lights and MagicStream
MENU sLIGHTS sALL ON
To manually switch on all lights and synchronize light colors:
Modes
Colors
All On

All Off

Schedule start and stop times for equipment

You can set timers (schedules) to automatically run equipment for pool filtration or turn on or off lights. Any
EasyTouch PL4/PSL4 circuit can be set to switch on and off on every or any day of the week. Up to four (4) total
system programs may be created for all circuits combined.
You can use the "Schedule" feature to set the time and day(s) when to switch the filter pump on and rotate the
pool/spa valves into the "Pool" or "Spa" position. The heater will automatically heat the pool or spa water up
to the set point temperature as set in the "Heat" menu (see page 30). If the pool has a separate jet pump or
blower controlled by AUX 1 and/or AUX 2 , these need to be scheduled separately. If you don't have enough or
you need to conserve auxiliary relay circuits, you can program up to four "Feature Circuits." If a feature circuit is
scheduled, it must be turned on from the control panel "Feature Circuits" menu to allow the schedule to run (see
page 23).
Continue on page 17.
EASYTOUCH PL4/PSL4 Control Systems User's Guide
®
To manually switch on or off all lights:

Up/Down button: Select: All Off or All On.
Press the Menu button save the settings and to return to the main menu items or

press the button again to return to the Main screen.
laminars, refer to "Lights Menu" on page 25.
®
Press the Up/Down button to select All On or All Off. Use the Sync feature with

any combination of up to three (3) SAm
MagicStream laminars to synchronize their colors before switching the lights on.
Press the Menu button to save the settings and to return to the main menu items or

press the button again to return to the main screen.
Continued
, SAL , IntelliBrite, FIBERworks
® ®
LED
®
lights and
®