Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Freedom Wedge Quad are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 17 Freedom Wedge Quad User Manual Rev. 1...
Introduction 2. Introduction Product Overview Back Panel View Menu Buttons LED light indicator DMX Out/In LED Display Fuse Holder Power In Power Out Adjustable leg Freedom Wedge Quad User Manual Rev. 1 Page 3 of 17...
Introduction Product Dimensions Side View 4.4 in 117 mm 6.6 in 166.5 mm 7 in 179.9 mm Top View 4.4 in 117 mm Page 4 of 17 Freedom Wedge Quad User Manual Rev. 1...
3. Setup AC Power The Freedom Wedge Quad has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
Charging the Battery The battery charges whenever the Freedom Wedge Quad is plugged into the external power cord and the charger is plugged into a power source. If the product is plugged in and not in operation, make sure the product is turned off.
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Freedom Wedge Quad may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
IR Setting Turns infrared on or off Sets the wireless DMX receiver drCH dr 1–16 channel Wireless DMX S-tr Sets the wireless DMX transmitter dtCH dt 1–16 channel Page 8 of 17 Freedom Wedge Quad User Manual Rev. 1...
Operation DMX Linking The Freedom Wedge Quad can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
010 No function Strobe 255 Strobe, slow to fast 4-CH Channel Function Value Percent/Setting 255 0–100% Green 255 0–100% Blue 255 0–100% Amber 255 0–100% Page 10 of 17 Freedom Wedge Quad User Manual Rev. 1...
7. Use <UP> or <DOWN> to increase or decrease the sound sensitivity (u 1–100). 8. Press <ENTER>. Preset Color Mode To run the Freedom Wedge Quad on a preset static color, do the following: Press <MENU> repeatedly until C-- shows on the display. Press <ENTER>.
Operation IRC-6 Infrared Remote Control The Freedom Wedge Quad can be operated with the CHAUVET IRC-6. To enable IR wireless control, follow the instructions below. 1. Press <MENU> to view the main menu on the display. 2. Use <UP> or <DOWN> until SEt is selected.
Master/Slave mode allows a single Freedom Wedge Quad product (the “master”) to control the actions of one or more Freedom Wedge Quad products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in transmitter mode, while the slave products will be set to operate in receiver mode.
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Page 14 of 17 Freedom Wedge Quad User Manual Rev. 1...
Maximum External Temperature Cooling System 104 °F (40 °C) Convection Channel Range Optional Controllers 4, 6, or 10 IRC-6 Ordering Product Name Item Code UPC Number Freedom Wedge Quad 03031672 781462220204 Freedom Wedge Quad User Manual Rev. 1 Page 15 of 17...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 16 of 17 Freedom Wedge Quad User Manual Rev. 1...
Visit the applicable website above to verify our contact information and instructions to request support. Outside the US, United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Freedom Wedge Quad User Manual Rev. 1 Page 17 of 17...