Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ FREEDOM H1
Summary of Contents for Chauvet DJ FREEDOM H1
- Page 1 User Manual...
-
Page 2: Table Of Contents
Sound-Sensitivity ....................Preset Color Mode ..................... Custom Color Mixing ..................IRC-6 Infrared Remote Control ..............IRC-6 Operation ....................Master/Slave Mode ..................5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................Freedom H1 User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Freedom H1 are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Product At A Glance
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 2 of 17 Freedom H1 User Manual Rev. 1... -
Page 5: Introduction
Introduction 2. Introduction Product Overview Menu Buttons LED Display Lens Power DC Power Switch IR Sensor Product Dimensions 3 in 75 mm 8.5 in 139 mm 3.8 in 97 mm Freedom H1 User Manual Rev. 1 Page 3 of 17... -
Page 6: Setup
Setup 3. Setup DC Power The Freedom H1 comes with an external Multi-Charger that can charge the batteries of up to 4 Freedom H1 products at the same time. AC Power (Multi-Charger) AC Power In DC Power Out (x4) Fuse Holder The Freedom H1 Multi-Charger is an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. -
Page 7: Battery Power
Setup Battery Power The Freedom H1 comes with a rechargeable lithium battery for cable-free operation. Charging the Battery The battery charges whenever the product is plugged into the Multi-Charger and the Multi-Charger is plugged into a power source. If the product is plugged in and not in operation, make sure the On/Off switch is in the Off position. -
Page 8: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Freedom H1 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes. -
Page 9: Operation
(slow), or oFF dIM2 dIM3 Infrared Turns infrared on or off Mode drCH dr 1–16 Wireless Turns on wireless DMX and sets S-tr transmitter or receiver channel dtCH dt 1–16 Freedom H1 User Manual Rev. 1 Page 7 of 17... -
Page 10: Wireless Dmx Linking
Use <UP> or <DOWN> to select the starting address, from d 1–512. Press <ENTER>. Wireless DMX Configuration The Freedom H1 offers wireless control of 2 or more products with a single DMX controller. To set up the D-Fi 2.4 GHz transceiver, follow the instructions below. For the transmitting product: Press <MENU>... -
Page 11: Dmx Channel Assignments And Values
101 Dimmer speed mode off Dimmer Speed Mode 152 Dimmer speed mode 1 (fast) 203 Dimmer speed mode 2 (medium) 255 Dimmer speed mode 3 (slow) Freedom H1 User Manual Rev. 1 Page 9 of 17... -
Page 12: 8-Ch
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Automatic Programs To run the Freedom H1 in automatic mode, follow the instructions below: Press <MENU> repeatedly until P-- shows on the display. Press <ENTER>. -
Page 13: Sound-Active Mode
Use <UP> or <DOWN> to increase or decrease the program speed, from u 1–100. Press <ENTER>. The product will return to the last selected mode. Preset Color Mode To run the Freedom H1 on a static color, follow the instructions below: Press <MENU> repeatedly until C-- shows on the display. Press <ENTER>. -
Page 14: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The Freedom H1 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until SEt shows on the display. Press <ENTER> to accept. Press <UP> or <DOWN> to select ON or OFF. -
Page 15: Master/Slave Mode
Operation Master/Slave Mode The Master/Slave mode allows a single Freedom H1 product (the “master”) to control the actions of one or more Freedom H1 products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in either Stand-Alone mode or with the IRC-6, while the slave (receiver) products will be set to operate in Slave mode. -
Page 16: Maintenance
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Page 14 of 17 Freedom H1 User Manual Rev. 1... -
Page 17: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range Wireless 6, 8 or 12 Ordering Product Name Item Code UPC Number Freedom H1 03031422 781462217709 Freedom H1 User Manual Rev. 1 Page 15 of 17... -
Page 18: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 16 of 17 Freedom H1 User Manual Rev. 1... -
Page 19: Contact Us
Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details. Freedom H1 User Manual Rev. 1 Page 17 of 17...