Procedure 6. Connect To An External Monitor (Optional) - Verathon GlideScope Cobalt AVL Single-Use Operation & Maintenance Manual

PROCEdURE 6. CONNECT TO AN EXTERNAL MONITOR (OPTIONAL)
WARNING
The external monitor must be safety‑approved medical equipment.
By using an HDMI‑to‑DVI cable, you can connect the Cobalt AVL Monitor to an external monitor that
is approved for medical use. For more information, please contact your Verathon
representative.
Note: Image quality on the external monitor may vary according the resolution of the external monitor.
Note: To maintain electromagnetic interference (EMI) within certified limits, the system must be used with
the cables, components, and accessories specified or supplied by Verathon. For additional information, see
the
System Parts & Accessories
than those specified or supplied may result in increased emissions or decreased immunity of the system.
1. Ensure that the video monitor is turned off.
2. On the back of the monitor, remove the HDMI cap from the video‑out port.
3. Connect the HDMI end of the cable to the video‑out port.
4. Connect the other end of the cable to the DVI port on an external monitor that is approved for medical
use.
5. Press the Power
6. Press the External Video
connection is successful, and the video displays on the external monitor.
7. To stop sending video to an external monitor, press the External Video
8. Prior to disconnecting the HDMI‑to‑DVI cable, ensure the video monitor is turned off.
22
and
Component Specifications
button. The monitor turns on.
button. The indicator LED to the right of the button illuminates when the
sections. The use of accessories or cables other
Video‑out port
Customer Care
®
button again.