Table of Contents
Advertisement
SETTING UP
WARNING
To reduce the risk of electrical shock, use only the accessories and peripherals recommended by
Verathon
Before you can use the system for the first time, you must inspect the components, set up the system, and
perform a functional test as recommended by Verathon. Complete the following procedures:
1.
Perform Initial
during shipment.
2.
Mount the Cobalt AVL Monitor
3.
Charge the Monitor
Note: The monitor will operate without charging the battery by using the Cobalt AVL Monitor 12 V DC
Power Adapter that shipped with the unit.
4.
Connect the Video
monitor and transmits the video data.
5.
Connect to an External Monitor
larger monitor screen, by using the HDMI‑to‑DVI cable.
6.
Configure User
and time.
7.
Perform a Functional
ensure that the system is working properly.
PROCEdURE 1.
PERFORM INITIAL INSPECTION
When you receive the system, Verathon recommends that an operator familiar with the instrument perform a
full visual inspection of the system for any obvious physical damage that may have occurred during shipment.
1. Verify that you have received the appropriate components for your system by referring to the packing list
included with the system.
2. Inspect the components for damage.
3. If any of the components are missing or damaged, notify the carrier and Verathon Customer Care or your
local representative. For contact information, visit verathon.com/support.
16
.
®
Inspection—Inspect the system for any obvious physical damage that may have occurred
(Optional)—Set up the Cobalt AVL Monitor on a mobile stand or IV pole.
Battery—You can use the system while the battery is charging.
Cable—Attach the cable that connects the video baton or laryngoscope with the
(Optional)—Connect the monitor to an external display source, such as a
Settings—Enter data customized to your clinic, and configure settings such as the date
Check—Before you use the device for the first time, perform a functional check to
Hide quick links:
Advertisement
Table of Contents
