Procedure 5. Connect The Video Cable - Verathon GlideScope Cobalt AVL Single-Use Operation & Maintenance Manual

PROCEdURE 5.
This procedure connects the video cable to the monitor, which displays the image transmitted from the
camera.
Ensure that the video monitor is turned off prior to connecting or disconnecting the video cable.
1. Align the arrow on the video cable and the arrow on the video cable port.
2. Insert the video cable into the port. You will hear a click when the cable is successfully connected.
Note: When disconnecting the video cable from the monitor, rotate the connector ring in the direction of
the arrow.
Operations & Maintenance Manual: Setting up
CONNECT THE VIdEO CABLE
Connector ring
21