Procedure 2. Mount The Cobalt Avl Monitor (Optional) - Verathon GlideScope Cobalt AVL Single-Use Operation & Maintenance Manual

PROCEdURE 2.
If you choose to mount the system, you may use either of the following configurations:
• Mount it on a GlideScope premium cart or mobile stand
easy for you to move the system from one location to another.
• Mount it on an IV pole
This procedure includes instructions for assembling the mobile stand, mounting the system on either the
mobile stand or an IV pole, and adjusting the monitor angle.
Figure 8. GlideScope Premium Cart
ATTACH THE MONITOR TO THE MOBILE STANd OR IV POLE
1. If you are using the GlideScope premium cart or mobile stand, assemble it according to the instructions
included with the component.
2. If you are using an IV pole mount, place the mounting bracket on the IV pole, and then tighten the
bracket attachment knob until the IV pole mount is secure.
Bracket attachment knob
3. On the mobile stand mount or the IV pole mount, ensure that the locking pin and quick‑release lever are
in the unlocked (horizontal) position.
Operations & Maintenance Manual: Setting up
MOUNT THE COBALT AVL MONITOR (OPTIONAL)
(Figure 10).
(Figure 8
Figure 9. Mobile Stand
Quick‑release lever
in unlocked position
Locking pin in
unlocked position
or Figure 9). These solutions make it
Figure 10. IV Pole Mount
IV pole mount
17