Table of Contents
Advertisement
PROCEDURE 5.
WARNING
The external monitor must be safety-approved medical equipment.
By using an HDMI-to-DVI cable, you can connect the GlideScope Video Monitor to an external monitor
that is approved for medical use. For more information, please contact your Verathon
representative.
Note: Image quality on the external monitor may vary according to the resolution of the external monitor.
Note: To maintain electromagnetic interference (EMI) within certified limits, the system must be used with
the cables, components, and accessories specified or supplied by Verathon. For additional information, see
the
System Parts & Accessories
than those specified or supplied may result in increased emissions or decreased immunity of the system.
1. Ensure that the video monitor is turned off.
2. On the back of the monitor, remove the HDMI cap from the video-out port.
3. Connect the HDMI end of the cable to the video-out port.
4. Connect the other end of the cable to the DVI port on an external monitor that is approved for
medical use.
5. Press the Power
6. Press the External Video
connection is successful, and the video displays on the external monitor.
7. To stop sending video to an external monitor, press the External Video
8. Prior to disconnecting the HDMI-to-DVI cable, ensure the video monitor is turned off.
Operations & Maintenance Manual: Setting Up
CONNECT TO AN EXTERNAL MONITOR (OPTIONAL)
and
Component Specifications
button. The monitor turns on.
button. The indicator LED to the right of the button illuminates when the
sections. The use of accessories or cables other
Video-out port
®
Customer Care
button again.
21
Advertisement
Table of Contents
