®
GlideScope
System
Figure 22. Attaching the video cable to the monitor and GVL
Visually inspect the GVL
NOTE:
are free of unintended rough areas, sharp edges,
protrusions, or cracks.
Attaching the Cobalt Video Baton to the Monitor
The Cobalt Video Baton includes an integrated video cable. To
attach it to the monitor, insert the video cable connector into the
port located on the face of the monitor so that the arrows on the
cable and the monitor are aligned as shown in Figure 21.
When connecting and disconnecting the connector cable,
NOTE:
grasp the cable by the gray sleeve (Figure 21).
Inserting the Cobalt Video Baton into the GVL
The Cobalt reusable Video Baton is used with a sterile, single-
®
use, GVL
Stat.
Cobalt Video Baton 1-2 is used with GVL
Cobalt Video Baton 3-4 is used with GVL
User's Manual
®
GVL
®
to assure that all surfaces
®
®
Getting Started
®
.
Connector Port
®
Stat
Stats 1 and 2
Stats 3 and 4
page 33