Setting Up; Procedure 1. Perform Initial Inspection - Verathon GLIDESCOPE TITANIUM Operation & Maintenance Manual

SETTING UP

WARNING
To reduce the risk of electrical shock, use only the accessories and peripherals recommended by
Verathon
Before you can use the system for the first time, you must inspect the components, set up the system, and
perform a functional test as recommended by Verathon. Complete the following procedures:
1. Perform Initial
during shipment.
2. Mount the System
3. Charge the Monitor
Note: The monitor will operate without charging the battery by using the GlideScope Video Monitor 12V
DC power adapter that shipped with the unit.
4. Attach the Video Cable &
connect the video laryngoscope to the video cable or Smart Cable.
5. Connect to an External Monitor
larger monitor screen, by using the HDMI-to-DVI cable.
6. Configure User
and time.
7. Perform a Functional
ensure that the system is working properly.
PROCEDURE 1. PERFORM INITIAL INSPECTION
When you receive the system, Verathon recommends that an operator familiar with the instrument perform a
full visual inspection of the system for any obvious physical damage that may have occurred during shipment.
Note: Due to the hand-polishing method used to create the titanium exterior of the reusable blades, slight
variations or irregularities may occur in the finish. These variations do not affect the cleaning process or
system efficacy.
1. Verify that you have received the appropriate components for your system by referring to the packing list
included with the system.
2. Inspect the components for damage.
3. If any of the components are missing or damaged, notify the carrier and Verathon Customer Care or your
local representative. For contact information, visit verathon.com/support.
14
® .
Inspection—Inspect the system for any obvious physical damage that may have occurred
(Optional)—Set up the GlideScope Video Monitor on a mobile stand or IV pole.
Battery—Note that you can use the system while the battery is charging.
Blade—Connect the video cable or Smart Cable to the monitor, and then
(Optional)—Connect the monitor to an external display source, such as a
Settings—Enter data customized to your clinic, and configure settings such as the date
Check—Before you use the device for the first time, perform a functional check to