To Do The Product Settings; To Get Access To The Menu - Husqvarna AUTOMOWER 420 Operator's Manual

2. Cutting height.
For more information about the operating modes
Start, Park and Pause , refer to Operating mode
Start on page 39 .
3.10.3.1 Map
The map shows the current position of the
product and the set centerpoint for GeoFence.
3.10.3.2 Settings in Automower
The product has factory settings but
the settings can be adapted to each
work area.
Most of the settings in the Automower
Connect app can be set in the display
of the product. Refer to
page 10 .
3.10.3.3 Messages
In this menu the previous fault and information
messages can be found. For some of the
messages, there are tips and advice to help to
rectify the fault.
Messages menu is only available for
Note: The
®
Bluetooth short-range connectivity.

3.11 To do the product settings

All commands and settings for the product are
done via the control panel. The control panel
consists of a display and a keypad, and all
functions are accessed through the menus. The
functions have factory settings to suit most work
areas, but the settings can be adapted to the
unique situation for each work area.
26 - Installation

3.12 To get access to the menu

1.
2.
3.
3.12.1 Menu structure
The main menu contains:
•
•
•
•
•
•
•
•
Refer to
Menu structure overview 2 on page 8 and Menu
structure overview 3 on page 9 .
3.12.2 Schedule
®
Connect
Note: The lawn should not be cut too often to
®
obtain the best result. If the product is allowed to
operate too much, the lawn may appear
Display on
flattened. The product is also subjected to
unnecessary wear.
3.12.2.1 To set the schedule
1.
2.
3.
4.
5.
6.
Push the STOP button.
Use the number buttons and the OK button
to enter the PIN code.
Push the MENU button.
Schedule
Cutting height
Security
Messages
Weather timer
Installation
Settings
Accessories
Menu structure overview 1 on page 7 ,
To get access to the menu
Do steps 1–3 in
on page 26 .
Use the arrow buttons and the OK button to
move through the menu structure
> Overview .
Use the arrow buttons and the OK button to
select the day.
Use the right arrow button to select the
period.
Push the OK button.
Calculate the suitable operating hours. Refer
To calculate the suitable operating hours
to
on page 27 .
1201 - 004 - 25.03.2020
Schedule