Symbols On The Battery; General Manual Instructions - Husqvarna AUTOMOWER 420 Operator's Manual

The installation function for manual
settings for the installation.
The settings function is where the
general settings for the products are
set.
The accessories function is where all
settings for the accessories for the
product are set.
The product will not cut the grass do to
the schedule function.
The product overrides the schedule
function.
The battery indicator shows the charge
level of the battery. When the product
charges the symbol flashes.
The product is put in the charging
station but do not charge the battery.
The product is set in ECO-mode.
For Automower
Connect@Home. Bluetooth
communication with your mobile
device.
The GPS-supported navigation is
active. Flashes as it collects GPS
information. Automower
The GPS-supported navigation is not
active. Automower
6 - Introduction
®
Connect and
®
wireless
®
430X/450X.
®
430X/450X.
The signal strength of the GPRS
reception.
Problem with the connection to the
Internet server.
Problem with the SIM card or the
module.

1.5 Symbols on the battery

Read the user instructions.
Do not discard the battery into fire and
do not expose the battery to a heat
source.
Do not immerse the battery into water.

1.6 General manual instructions

The following system is used in the Operator's
Manual to make it easier to use:
italics is a text that is shown
• Text written in
in the display or is a reference to another
section in the Operator's Manual.
• Text written in bold is one of the buttons on
the product.
UPPERCASE and italics refer
• Text written in
to the different operating modes available in
the product.
1201 - 004 - 25.03.2020