Husqvarna AUTOMOWER 420 Operator's Manual page 53

Message Cause
Connection prob-
Problem with the Automower
lems
module
Connection set-
Settings for wireless connectivity have
tings restored
been restored due to an error.
SIM card requires
The SIM card must be unlocked.
PIN
SIM card locked
The SIM card must be replaced.
SIM card not found Automower
card to be inserted in the mower.
GeoFence prob-
The GeoFence is not work due to poor
lem
(or no) communication with the system.
1201 - 004 - 25.03.2020
®
Connect
®
Connect requires a SIM
Action
Restart the product. If there still is a
connection problem, try to unpair the
(My mowers) and then pair it
product
again. If the problem remains, contact
your local Husqvarna representative.
Check and revise settings if necessary.
Make sure the correct SIM PIN has
been entered into the mower's menu
(Network > SIM card). Contact your lo-
cal Husqvarna representative if this
message appears often.
Contact your local Husqvarna repre-
sentative.
Contact your local Husqvarna repre-
sentative.
Contact your local Husqvarna repre-
sentative.
Troubleshooting - 53