Husqvarna AUTOMOWER 420 Operator's Manual page 36

in less than 24 hours to validate your
account.
4. Log in to your Husqvarna account in the
®
Automower Connect app.
®
3.12.13.3 Automower Connect@Home
Connect@Home uses a short-range Bluetooth
wireless technology. This means that you can
communicate between the mobile device and the
product while you are in communication range.
®
An icon for Bluetooth communication will show
in the product display when the product is
connected with your mobile device.
Note: Connect@Home has equivalent but not as
extended functions as Automower
uses the same app.
To pair Connect@Home and the product
To get access to the menu
1. Do steps 1–3 in
on page 26 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Connect@Home > Pairing >
New pairing .
3. Follow the instructions in the app.
®
Note: Automower Connect is always connected
to your product as long as the mobile device
have connection with the mobile network, the
product is charged and switched on.
To remove paired accounts
To get access to the menu
1. Do steps 1–3 in
on page 26 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Connect@Home > Pairing >
Remove paired accounts .
3. Push the OK button to select
remove all paired accounts.
®
3.12.13.4 Automower Connect
®
Automower Connect is included in 430X/450X
and is available as an accessory for Automower
420/440.
®
To pair Automower Connect and the product
1. Do steps 1–3 in To get access to the menu
on page 26 .
36 - Installation
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower
Pairing > New pairing .
3. Follow the instructions in the app.
To enable the GeoFence function
®
GeoFence is a GPS-based theft protection that
makes a virtual fence for the product. You will get
a message if the product is moved on the other
side of the GeoFence.
1. Put the product in the center of the work
area.
2. Do steps 1–3 in
®
Connect, and on page 26 .
3. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
GeoFence > Activate GeoFence .
4. Push the OK button.
5. Select
button.
To set a new center point for the Geofence
function
1. Put the product in the center of the work
area.
2. Do steps 1–3 in
on page 26 .
3. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
GeoFence > New center point .
4. Push the OK button.
To set the GeoFence level of sensitivity
The higher level of GeoFence sensitivity, the
easier the alarm starts.
1. Do steps 1–3 in
on page 26 .
YES/NO to
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
GeoFence .
®
3. Use the arrow buttons to select level of
GeoFence sensitivity.
4. Push the BACK button.
To use the SMS function
The SMS function sends you an SMS when the
product is moved out of the GeoFence.
®
Connect >
To get access to the menu
Activate GeoFence and push the OK
To get access to the menu
To get access to the menu
1201 - 004 - 25.03.2020