To Do The Product Settings - Husqvarna 430XH Operator's Manual

For more information about the operating modes
Start, Park and Pause , see Operation on page
34 .
3.9.2.2 Map
The map shows the current position of the
product and the set centerpoint (origin) for
GeoFence.
3.9.2.3 Settings in Automower
The product has factory settings but
the settings can be adapted to each
work area.
Most of the settings in the Automower
Connect app can be set in the display
of the product. Refer to
product settings on page 24 .

3.10 To do the product settings

The product has factory settings but the settings
can be adapted to each work area.
3.10.1 To get access to the menu
1. Push the STOP button.
2. Enter the PIN code on the keypad.
3. Push the MENU button.
3.10.2 To do the timer settings
3.10.2.1 To calculate the timer setting
1. Calculate the dimension of your lawn in m
2
yd .
2 2
2. Divide the m / yd of the lawn with the
approximate operation capacity. Refer to
table below.
3. The result is equal to the number of hours
that the product must operate each day.
Note: The operation capacity is approximate and
timer settings can be adjusted.
24 - Installation
Model
Automower
Automower
Example: A lawn of 1000 m
a Automower
®
Connect
1000 m
1200 yd
Days /
week
®
7
To do the
3.10.2.2 To set the timer
1.
2.
3.
4.
5.
2
/
6.
3.10.2.3 To copy the timer setting
1.
2.
Approximate operation
capacity, m
®
430XH 133 / 159
®
450XH 208 / 248
2
/ 1200 yd
®
430XH.
2
/ 133 ≈ 7.5 h.
2
/ 159 ≈ 7.5 h.
h / day Timer settings
7.5 07:00 - 14:30 / 07:00
am - 2:30 pm
To get access to the menu
Do steps 1–3 in
on page 24 .
Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings .
Use the arrow buttons and the OK button to
select the day.
Use the arrow buttons and the OK button to
select the time period.
Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods
each day.
If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
To get access to the menu
Do steps 1–3 in
on page 24 .
Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Copy
to .
2 2
/h / yd /h
2
, cut with
Timer >
Timer >
1230 - 001 -