Fans - HP OMEN Maintenance And Service Manual

Fans

NOTE: The left and right fans are spared separately.
Description
Left fan (includes cable)
Right fan (includes cable)
Before removing the fans, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Optical drive (see
Remove the fans:
1. Disconnect the fan cables (1) from the system board.
2. Remove the fan cables (2) from the routing path clips.
3. Remove the two Phillips screws (3) securing the fans to the computer.
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Battery on page 37)
Optical drive on page
44)
47)
Spare part number
931576-001
931577-001