Fans - HP OMEN 15-en0000 Maintenance And Service Manual

5. (GeForce GTX 1650Ti graphics cards) Thoroughly clean the thermal material from the surfaces of the
heat sink and the system board components each time the heat sink is removed. Replacement thermal
material is included with the heat sink and system board spare part kits. The following illustration shows
the replacement thermal material locations.
Thermal paste is used on the system board components (1), (3), (5) and on the heat sink areas (2), (4),
(6) that service them.
Reverse this procedure to install the heat sink.

Fans

To remove the fans, use this procedure and illustration.
Table 6-6 Fan description and part number
Description
Fan assembly for use in models with GeForce GTX 1660Ti and RTX graphics cards
Fan assembly for use in models with GeForce GTX 1650Ti graphics cards
Before removing the fans, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drives
4. Remove the battery (see
5. Remove the heat sink (see
Remove the fans:
44 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 31).
(Solid-state drive on page
Battery on page 37).
Heat sink on page 41).
31).
32).
Spare part number
L98737-001
L98738-001