Table of Contents
Advertisement
NCB-EL/FL Network Applications
8.4 Configuration Four
An NCB-EL/FL router can be used as a redundant router for another NCB-EL/FL. A sample
diagram is shown in
The Ether/Plug configuration settings for this channel is shown in
The IP Central Site Member Name MUST be set to "None." The member name Ech GW1 is to be
bound into the Echelon Gateway first. Then, Branch 1 is to be bound into the Echelon Gateway as
connected to the member Echelon Gateway. When the router that has the member name Branch 2
is bound into the Echelon Gateway, it must be set to "Redundantly Pair with an existing Router."
Branch 2 will then be redundantly paired with the router Branch 1. This configuration will function
if either Branch 1 or Branch 2 router becomes inoperable.
62
Figure
8.7.
Member Name: LAS
Host IP Address:
101.101.101.101
NCB-EL/FL
LAS
Figure 8.7 Example 4 Network Diagram
Figure 8.8 Configuration Example 4 View in Ether/Plug Application
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
Member Name: Branch 1
Host IP Address:
101.101.101.102
NCB-EL/FL
NION 1
NCB-EL/FL
NION 2
Member Name: Branch 1
Host IP Address:
101.101.101.103
Figure
8.8.
Configuration Four
Advertisement
Table of Contents
