Table of Contents
Advertisement
NCB-EL Installation
5.3 NCB-EL Installation
5.3.1 Required Components
To use a NCB-EL the following components are required:
•
"NCB-EL
•
JNISCAB-5 enclosure (ordered separately).
•
HSP-121 Power Line Surge Suppressor (required included with JNISCAB-5 order).
•
Direct connection to your Network with a customer supplied Ethernet cross-over cable or a
standard Ethernet cable.
NCB-EL Components
These are the main components that are shipped with a NCB-EL order:
•
NCB-EL Network Combiner Module.
•
FTXC Echelon SMX network transceiver (installed).
•
NCB transformer power supply (+24 VDC 400mA, center POSITIVE, outer NEGATIVE).
5.3.2 Installation Overview
These are the recommended installation steps for the router:
1.
"JNISCAB-5 Power Outlet and EDCO HSP-121 Installation" on page
2.
"JNISCAB-5 Shelf Installation" on page
3.
"PNET-1 Installation" on page
4.
"Router Installation" on page
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
Components".
41.
42.
40.
NCB-EL Routers
38.
37
Advertisement
Table of Contents
