4: Jniscab-1 Installation; Mounting The Enclosure To Its Wall Position - Johnson Controls Intelligent Fire Integrator ROUTMB Installation & Operation Manual

ROUTMB Routers
3.3.4 JNISCAB-1 Installation
This section details how to install the ROUTMB into the JNISCAB-1 enclosure. This enclosure is
provided with door and key lock.

Mounting the Enclosure to its Wall Position

Step 1. Use the provided key to unlock the enclosure cover.
Step 2. Remove the enclosure cover.
Step 3. Mount the enclosure to the wall. Refer to the enclosure mounting hole layout below.
22
0.25
0.50
0.50
12.0
Figure 3.2 JNISCAB-1 Mounting Hole Layout
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
ROUTMB Installation
6.0
Mounting
Studs with
Standoffs
attached
9.0
0.87
7.75