Canada; Environmental Requirements; Related Documentation; Product Descriptions - Johnson Controls Intelligent Fire Integrator ROUTMB Installation & Operation Manual

For johnson control echelon networks
Table of Contents

Advertisement

About Routers and Repeaters

Canada

CSA C22.1—Canadian Electrical Code, Part I, Safety Standard for Electrical Installations
WARNING: Installation
!
Improper installation, maintenance, and lack of routine testing could result in system malfunction.

1.2 Environmental Requirements

This product must be installed in the following environmental conditions:
Temperature range of 0°C to 49°C (32°F - 120°F).
93% humidity non-condensing at 30°C (86°F).

1.3 Related Documentation

The following is a list of documentation resources related to the Intelligent Fire Integrator™
system.
Intelligent Fire Integrator™ JNFN GW Embedded (P/N 53138)
Intelligent Fire Integrator™ JNFN GW PC (P/N 53097)
Intelligent Fire Integrator™ Johnson Controls Echelon Gateway (P/N 53096)
Intelligent Fire Integrator™ NION-2C8M (P/N 53346)
Intelligent Fire Integrator™ NION-16C48M (P/N 53347)
Intelligent Fire Integrator™ NION-EST2 (P/N 53349)
Intelligent Fire Integrator™ NION-EST3 (P/N 53345)
Intelligent Fire Integrator™ NION-Simplex 4010 (P/N 53351)
Intelligent Fire Integrator™ NION-Simplex 4020 (P/N 53352)
Intelligent Fire Integrator™ NION-Simplex 4100 (P/N 53353)
Intelligent Fire Integrator™ NetLogic (P/N 53095)
Intelligent Fire Integrator™ Configuration Tool (P/N 53380)
NOTE: The contents of this manual are important and must be kept in close proximity of the
Workstation. If building ownership is changed, this manual including all other testing and
maintenance information must also be passed to the current owner of the facility. A copy of this
manual was shipped with the equipment and is also available from the manufacturer.

1.4 Product Descriptions

Routers

Routers are optional devices for use with the Intelligent Fire Integrator™ system. Routers, when
used in pairs, allow you to connect multiple Echelon networks spanning great distances. Router
options are the ROUTMB, NCB-EL, NCB-FL, and NCB-IM. ROUTMBs must be used to separate
(installed between) 4WRMB from a subsequent 4WRMB when such routing exists on Echelon
networks.
10
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
Environmental Requirements

Advertisement

Table of Contents
loading

Table of Contents