4WRMB Installation
Mounting the 4WRMB in the Enclosure
When installing the 4WRMB in this enclosure, be sure to use the inboard set of four mounting
studs as shown below.
JNISCAB-1
4WRMB
Motherboard
Use Screws to
attach board
to cabinet
studs
Use
Transceiver
stand-off to
attach board to
cabinet studs
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
Figure 2.4 4WRMB Mounting Stud Locations
4WRMB Repeaters
17