Table of Contents
Advertisement
Section 8 NCB-EL/FL Network Applications
This section provides examples for supported configurations for TCP/IP connection. The examples
will also include a discussion of pros and cons for each scenario.
8.1 Configuration One - Basic Configuration
The simplest configuration of the NCB-EL/FL routers can be achieved when only two or three
NCB-EL/FL routers are in use. This network may contain any combination of NIONs and a
backup Echelon Gateway.
Member Name: LAS
Host IP Address: 101.101.101.101
The following figure shows the corresponding configuration that would be seen in the Ether/Plug
application for Configuration One:
Field Descriptions for Configuration One
•
The channel name is simply a description of the TCP/IP network shared by all the NCB-EL/FL
routers.
•
The global IP sub-net mask will depend on the TCP/IP network.
•
The available setting in the drop down menu for the IP Address will be described as various
TCP/IP connections are discussed.
IFI Routers/Repeaters Installation & Operation Manual - P/N: 53388:Rev: A1 5/5/09
Figure 8.1
NCB-EL/FL
LAS
LAS Node 112
Figure 8.1 NCB-EL/FL Configuration One Example
Figure 8.2 Configuration Example 1 View in Ether/Plug Application
shows this connection.
LAS Node 113
Member Name: Branch 1
Host IP Address: 101.101.101.102
NCB-EL/FL
NCB-EL/FL
LAS Node 114
Member Name: Branch 1
Host IP Address: 101.101.101.103
NION 1
NION 2
57
Advertisement
Table of Contents
