Table of Contents
Advertisement
Installation
Electrical connection
All electrical work should be carried out
by a suitably qualified and competent
Miele approved technician in strict
accordance with local and national
safety regulations.
This appliance is supplied with a power
cord without plug for fixed connection
to your power system.
Fuse rating of branch circuit should be
minimum 15 A and maximum 30 A.
The voltage and connected load are
given on the data plate situated at the
front of the oven interior. Please ensure
that these match the household mains
supply.
For extra safety it is advisable to install
a suitable residual current device
(RCD) / ground fault interrupter (GFI).
Contact a qualified electrician for
advice.
If the cord is damaged a new cord must
be fitted by a Miele approved
technician.
WARNING - THIS APPLIANCE
MUST BE EARTHED
114
Hide quick links:
Advertisement
Table of Contents
