Miele H 7860 BPX Operating And Installation Instructions page 82

Hide thumbs Also See for H 7860 BPX:
Table of Contents

Advertisement

Roasting
Important usage notes
To ensure the probe works correctly,
please observe the following
instructions.
The metal tip of the food probe can
break.
Do not use the food probe to lift or
carry the food.
- Do not use tall, narrow metal cooking
containers as these can weaken the
signal.
- For wireless food probes, avoid
placing metal objects above them,
such as a lid, aluminium foil, the wire
rack or the universal tray on the shelf
levels above. Glass lids can be used.
- Do not use another proprietary metal
food probe at the same time.
- Ensure that the handle of the food
probe is not sitting in the cooking
liquid, on the food or on the edge of
the cooking container.
- You can place the meat in a pot or on
the rack.
- The metal tip of the food probe must
be fully inserted into the centre of the
food so that the temperature sensor
reaches more or less to the core. The
handle should point diagonally
upwards and not horizontally towards
the corners of the oven or the door.
- When cooking poultry, insert the
metal tip into the thickest part of the
breast. Press the breast with your
index finger and thumb to find the
thickest part.
82
- The metal tip must not touch any
bone or be inserted in areas with a lot
of fat. Heavily marbled areas and
bones can cause cooking to end
prematurely.
- If the meat is very heavily marbled
with fat, select the highest core
temperature given in the cooking
charts.
- When using aluminium foil or roasting
bags, insert the food probe through
the foil/bag into the centre of the
food. You can also place meat inside
the bag or foil with the food probe
already inserted. Follow the roasting
bag manufacturer's instructions.
- The food probe can only be inserted
almost horizontally in very flat pieces
of food such as fish. Therefore cook
flat food in glass or ceramic cooking
containers as the walls of a metal
cooking container would disrupt the
radio signals.
A message will appear in the display if
the food probe is no longer
recognised during a cooking process.
Change the position of the food probe
in the food.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents