Using The Appliance; Selecting A Menu Option; Scrolling; Exiting A Menu - Miele H 7860 BPX Operating And Installation Instructions

You operate the oven via the touch
display by touching the desired menu
option.
Each time you touch a possible option,
the relevant characters (word and/or
symbol) light up orange.
Fields for confirming an operating step
are highlighted in green (e.g. OK).

Selecting a menu option

 Touch the field or value you want in
the display.

Scrolling

You can scroll left or right.
 Swipe across the screen. To do this,
place your finger on the touch display
and swipe it in the direction you want.
The bar at the bottom shows you where
you are in the current menu.

Exiting a menu

 Touch the  sensor control or touch
the ...  symbol in the menu path.
 Touch the  symbol to switch to the
status display.
Entries made before this which have not
been confirmed with OK will not be
saved.

Changing a value or setting

Changing a setting in a list

The current setting is highlighted in
orange.
 Touch the desired setting.
The setting is now saved. This will take
you back to the previous menu.

Using the appliance

Entering numbers with the roller

 Swipe the roller up or down until the
value you want is displayed in the
centre.
 Confirm with OK.
The changed number is now saved.
Entering numbers using the
numerical keypad
 Tap on the value that is in the middle
of the numerical keypad.
The numerical keypad will appear.
 Touch the desired numbers.
As soon as you enter a valid value, OK
turns green.
Use the arrow to delete the last entered
number.
 Confirm with OK.
The changed number is now saved.
Changing the setting with a segment
bar
Some settings are represented by a bar
        with seven segments. If all
of the segments are illuminated, the
maximum value is selected.
If none of the segments are illuminated
or if only one is, the minimum value is
selected or the setting is switched off
altogether (e.g. buzzers).
 Touch the corresponding segment on
the segment bar to change the setting.
 Select
On or Off
on or off.
 Confirm your selection with OK.
The setting is now saved. This will take
you back to the previous menu.
to switch the setting
21