Tab. VI-08 – Setpoint Subscreens – Table of Text, Data, Ranges, etc.
Setpoint Screen Title
Auto Local or Remote
Front Panel CWS
Front Panel CLS
Condenser Limit Stpt
Low Ambient Lockout Stpt
Low Ambient Lockout
Ice Building
Front Panel Ice Term. Set pt
Cprsr 1A Pumpdown (7)
Cprsr 1B Pumpdown (7)
Cprsr 2A Pumpdown (7)
Cprsr 2B Pumpdown (7)
EXV Ckt 1 Open (7)
EXV Ckt 2 Open (7)
Ckt 1 Lockout
Ckt 2 Lockout
External Chilled Water Setpt
External Current Limit Set point
Date
Time of Day
Display Units
Language
Notes:
(1) Button is reverse video while the function is active and then returns to normal.
(2) Language choices are dependent on what the Service Tool has setup in the Main Processor. Get Radio Button names from Main Processor setups.
(3) Temperatures will be adjustable to 0.1 °F or °C or 1 deg F or C dependent on the resolution setting adjustable through the Service Tool. The Main Processor
will provide the minimum and maximum allowable value.
(4) Adjustable to nearest integer or whole %. The Main Processor will provide the minimum and maximum allowable value.
(5) Enables a DynaView Lockout screen. All other screens time out in 30 minutes to this screen. The DynaView Lockout Screen will have 0-9 keypad to permit the
user to reenter the other DynaView screens with a fixed password.
(6) The Date and Time setup screen formats deviate slightly from the standard screens defined above. See the alternate screen layouts following.
(7) The subscreen for these setpoints will have the additional direction "Available OnlyWhen Unit Is In Stop".