Trane R Series Installation Operation & Maintenance page 69

69
Controls Interface
consistent with the circuit to which they belong. One circuit not operating will not
shut the chiller down. Viewing the "Compressor" screen will indicate whether a
circuit is not operating and for what reason.
A complete listing of diagnostics and
codes is included in the Diagnostic
Section.
Power-Up
On Power-Up, DynaView will progress
through three screens:
First Screen, Version # of the Boot, full
version # displayed.
This screen will display for 5 seconds
and move on to the second screen. The
contrast will also be adjustable from this
screen.
Second Screen, Application or No
Application.
This screen will display for 5 seconds "A
Valid Application Is Present" or "A Valid
Application Is Not Present" and move
on to the third screen.
Third Screen, First screen of the
Application, the Chiller Tab.
Display Formats
Units
Temperature settings are in °F or °C,
depending on Display Units settings.
Settings can be entered in tenths or
whole degrees depending on a menu
setting at the Tech-View.
Dashes ("——") appearing
temperature or pressure
indicates that the value is invalid or not
applicable.
Languages
English plus two alternate languages
may be installed with DynaView and will
reside in the main processor. English
will always be available. Alternate
languages must be installed using
TechView, Software Download View.
RTAC-SVX002A-EN
in a
report,