Trane R Series Installation Operation & Maintenance page 5

RTAC-SVX002A-EN
General Information
Fig. II - 01 - Typical RTAC Unit
Chilled water inlet and outlet openings
are covered for shipment.
compressor has a separate compressor
motor starter. The RTAC series features
Trane's exclusive Adaptive
™ logic, which monitors the control
variables that govern the operation of
the chiller unit. Adaptive Control logic
can adjust capacity variables to avoid
chiller shutdown when
and keep producing chilled water.
The units feature two independent
refrigerant circuits.
unloaders are solenoid actuated and
oil pressure operated. Each refrigerant
circuit is provided with filter, sight
glass, electronic expansion
and charging valves. The shell-and-
Each tube type evaporator is manufactured
in accordance with ASME standards
or other international codes. Each
Control evaporator is fully insulated and is
equipped with water drain and vent
connections. Packaged units have heat
tape protection to - 20°F (-28.9°C) as
standard. As an option, a convenience
necessary, outlet can be supplied.
Compressor
valve,
Control Panel
5