Table of Contents
Advertisement
• Alarm output (ALM1, ALM2 option)
• Loop break alarm output (Option)
• Heater break alarm input signal (option)
• Heater break alarm output (option)
• Ramp/soak function (option)
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
• Output update cycle time: 500msec
• Relay contact output ×2-pts SPST contact
Contact capacity:
(Standard load)
Minimum switching current: 100mA (DC24V)
Mechanical life:
Electrical life:
• Output update cycle time: 500msec
• Alarm setting range:
• Relay contact output:
1 ~ 30A:
20 ~ 50A:
*However, the output proportion cycle time must be 20
sec or above.
• Output update cycle time:
• Alarm setting range:
• The alarm output relay is also used for this output.
Program pattern count:
Number of ramps/soaks
per pattern:
Time indication range:
Memory backup:
OFF/run by digital input possible (only when start/reset
option is provided)
87
AC220V/DC30V 1A
(resistance load)
AC220V/DC30V 0.3A
(inductive load)
12 million cycles (200
times/min.)
100 thousand cycles
(Standard load, 20 times/
min.)
0.0 ~ 99 min 59 sec
Alarm relay also used for
this
CT (CTL-6-SF)
CT (CTL-12-S36-8F) used
500msec
1 ~ 50A
1 pattern
Maximum of 4
0 hour 0 min - 799 hours
EEP-ROM
Advertisement
Table of Contents
