2.
2.1 Caution on handling
1) Do not install the unit in any of the following places.
2) Mounting
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
CAUTION
• A place where the ambient temperature exceeds the range of -10 to
50°C
• A place where the ambient humidity exceeds 90%RH
• A place where temperature changes suddenly or dew condensation
occurs
• A place exposed to corrosive gases (sulfuric gas, ammonia, etc.) or
combustible gases
• A place where vibration or shock is likely to be directly transmitted to
the body.
• A place exposed to water, oil, chemicals, vapor, steam, etc.
• A place with much dust, salt or iron component
• A place with much inductive disturbance, static electricity, magnetism
or noise
• A place exposed to direct sunlight
• A place where heat such as radiant heat stays
•CN4810/20
For mounting, attach the supplied mounting brackets (2 units) on top
and bottom and tighten with a screwdriver. Tightening torque is about
147N.cm (1.5kg.cm). (The case is made of plastic. Care should be
taken not to tighten forcedly)
15