Table of Contents
Advertisement
Operating procedure
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
(ramp soak command)
(power-on start command) Set this to determine whether
(first-ramp target value)
(second-ramp target value)
(third-ramp target value)
(fourth-ramp target value)
(first ramp segment time)
(first soak segment time)
(second ramp segment time)
(second soak segment time)
(third ramp segment time)
Switches the program
operation modes.
Local operation
Program run
Program temporary halt
the power-on start should be
made. (Yes/No)
Sets the target value (SV)
during each ramp. (0~100%FS
E.U.)
Sets the duration (in hours and
minutes) of each time segment
61
Advertisement
Table of Contents
