Table of Contents
Advertisement
Digital output
* This function is an option.
Digital transmission function
Using the RS-485 communication, this function allows remote control
for parameter settings and process monitoring. This employs the multi-
drop system, and allows connection of a maximum of 31 units.
Operating procedure
Perform transmission in accordance with the CN4800 Transmission
Protocol Specifications. The available commands are for polling
(parameter read), selecting (parameter write) and control (parameter
save). Communication settings are fixed as described below. Make
sure that the host side has the same settings.
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
(station No.)
Transmission signal ..... RS-485
Transmission rate ........ 9600 bps
Parity ........................... Odd
Stop bit ........................ 1 bit
Parameter to be used
Set the station number (1~31).
67
Advertisement
Table of Contents
