Omega FUZZY LOGIC CN4800 Manual page 33

PV value display
PV
Set point value display
SV
Control output-1 monitor lamp
Output 1(OUT1)
Control output 2 or remote operation monitor lamp
Dual Control type
Output 2(OUT2)
Remote SV type
REM
ogy Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |
Displays the measured value, as well as
the failure information. When more than
one failure occurs simultaneously, the
failure information of the highest priority
alone will be displayed.
Display Meaning
Main unit failure
Heater disconnected
Control loop failure
Displays the set point value.
(During auto-tuning or manual operation,
the display of
and set point value alternate.)
Lights when Output 1 is ON. (it does not
light for the current output type.)
This lamp lights when Output 2 is ON or
during remote operation. (it does not
light for the single output type.)
Acts as the control output 2 monitor lamp.
Acts as the remote operation monitor lamp.
31
Priority
High
Low
or